Ordered by customer in December 2022, for a specific job, that never materialized. Never used or even unwrapped. In storage since arrival. New condition! Available and ready to load.
The 400S Structural Bandsaw from DoALL Saw Products is a versatile metal cutting saw ideal for small to medium-sized shops.
INCLUDED OPTIONAL ACCESSORIES
- Full cycle attachment, Pneumatic
- 5ft Medium Idler Roller Conveyor (Capacity 850 Lbs)
- Invoice Sub-Total (before tax & shipping) : $17,705
- Fixed Control Console: Ergonomically placed control console for ease of operation and safety of the operator.
- Variable Frequency Band Drive: The Variable Frequency Band Manual Blade Tension Drive allows the operator to dial in their band speed to fine tune cutting performance supplying maxiumum torque to the tooth tips of the saw band.
- Rapid head down w/ Feed Control: Three position head control allows the operator in rapid mode to quickly position the saw head above the material, the head will stop at position in the hold mode, and create feed rates with the micrometer adjustment in the feed mode for maximizing cutting performance.
- Coolant Thru Carbide Faced Saw Guide Inserts: Supplies coolant to the blade evenly before the cut creating straighter cuts and allowing longer blade life due to coolant being supplied at the tooth tip.
- Band Wheels: Time honored rack and pawl vice system using an acme thread screw minimizes setup / clamping time aiding in increased production and decreased vise maintenance.
- Manual Blade Tension: Positive stop to prevent possible error of over/under tightening the band for maximum cutting rates and band life.
Band Brush: Gear driven band brush removes the chips from the blade
gullets which would prevent the blade from attaining maximum cutting rates and blade life.
Counter Balance Spring: Counterbalance spring maintains constant head weight throughout the cut keeping the blade tooth load equal aiding in maximum blade life.
|Capacity at 90° Rectangle
||10" x 16"
|Capacity at 90° Round
|Capacity at 45° Rectangle
||9" x 10-3/4"
|Capacity at 45° Round
||1" x 0.035"
||Variable 500 ~ 400 fpm
||Spring Loaded by Hand Wheel
||Infinitely Variable, Hydraulic
||14.5" (368mm) diameter
|Material Pass Line Height
|Floor Space Required
||87" x 42" x 55"