Make: Ganesh
Model: Cyclone-32CS
Year: 2008
7-Axis, Twin-Spindle Mill / Turn Center
with Subspindle, "C" & "Y" Axis
The GANESH Cyclone-32 CS is very robust and rigid, allowing full use of the 10HP main spindle. The machine can make aggressive rough cuts and then finish with a second tool while achieving much greater tool life on all tools. This machine allows for multiple tool passes with rough and finish cutting of all part features.
Currently cleaned. Located in Chatsworth, CA and available for inspection.
(818) 718-6734
FEATURES
- 10-HP, 6000-rpm Main Spindle
- 5-HP, 6000-rpm Sub-Spindle
- C-Axis
- 4-Axis Servo Motor Control - X, Y, Z, & C axis
- 18 Main Spindle Tool Positions with 7-Live Tools
- 6-Turning Tools
- 5-End Working Static Drill / Bore / Tapping Tools (ER-20 Collet Chucks)
- 4-Overhead Radial Driven Tool Spindles
- 3-Axial Driven Tool Spindles
- 9 Back-Working Tool Positions with 4-Live Tools
SPECIFICATIONS
| MAIN SPINDLE |
||
| Spindle Motor |
10HP |
|
| Maximum RPM |
6,000 rpm |
|
| Collet Nose |
Traub A-32 |
|
| Maximum Barstock Diameter |
1.25" |
32mm |
| X-Axis Travel |
7.28" |
185mm |
| Y-Axis Travel (true Y-axis) |
19.29" |
490mm |
| Z-Axis Travel |
6.50" |
165mm |
| Rapid Travel Speed: X, Y, Z |
1,181 ipm |
30 m/min |
| Minimum input unit |
0.00004" |
0.01mm |
| OD Turning Tool Positions |
6 OD Tools |
|
| ID Turning Tool Positions |
5 ID Tools |
|
| OD Turning Tool Size |
1/2" |
12mm |
| Spindle Center Height |
40" |
1015mm |
| SUB SPINDLE |
||
| Sub Spindle Motror |
5-HP 30-minute duty-rated |
|
| Maximum Barstock Diameter |
1.25" |
32mm |
| Sub Spindle RPM |
6,000 rpm |
|
| X-Axis Travel |
11.53" |
293mm |
| Z-Axis Travel |
11.61" |
295mm |
| Minimum Input Unit |
0.00004" |
0.01mm |
| ID Turning Tool Bore Size |
25mm |
|
| LIVE TOOLING |
Gear Driven |
42mm bearings |
| Cross Slide Live Tools |
(4) ER-20 |
4,000-rpm, 2-HP |
| Front Slide Live Tools |
(3) ER-20 |
4,000-rpm, 1-HP |
| Subspindle Axial Live Tools |
(4) ER-20 |
|
| Live Tool Collet Size |
ER-20 collet, 1/2" shank |
|
| MACHINE DIMENSIONS |
||
| Machine Length |
101" |
2420mm |
| Machine Depth |
68" |
1500mm |
| Machine Height |
80" |
1985mm |
| Machine Weight |
8,000 lbs |
3,628 kgs |
| Machine Power Requirements |
220 Volt, 3-Phase, 60Hz |
63 Amps, 24Kva |