
Make: Sharp
Model: 1640LV
Condition: New
Equipped with geared headstock, hardened and ground bed ways.
Currently located at Machinery Exchange in Chatsworth, CA on our show room floor.
FEATURES
- D1-8 Camlock, 3” Hole
- Removable Gap-Bed
- Direct Selection For Inch/Metric Threads
- One Piece Cast Meehanite Bed
- 7-1/2 Hp Spindle Motor
- Digital Variable Speed (DVS) on “LV” Models
- Newall 2-Axis Digital Readout
- 3-Jaw Chuck 10”
- Face Plate (16”)
- Steady Rest (1/2” to 6”)
- Follow Rest ( 0.59” – 2.76”)
- Coolant System
- Full Length Splash Guard
- American Tool Post
- Halogen Work light
- Longitudinal Carriage Stop
- Center sleeve ( MT 5 x 3)
- Dead centers ( MT# 4x1, MT # 5 x1)
- Tailstock
- Machine is set only for 220 V.
- Tool Kit includes:
Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Oil can, Grease Gun, Rear Way Cover Bracket, Pin for Indicator, Can of Paint
SPECIFICATIONS
CAPACITY
Capacity |
|
---|---|
Swing Over Bed | 16 in. (406.4 mm) |
Swing Over Cross Slide | 8.75 in. (222.25 mm) |
Swing Over Gap | 24.37 in. (618.9 mm) |
Gap Width (In Front Of Face Plate) |
9.75 in. (247.6 mm) |
Distance Between Centers | 40 in. (1,016 mm) |
General | |
---|---|
Spindle Motor | 7.5 HP (5.59 Kw) |
Voltage | 230V/460V |
Phase | 3 phase |
Power Consumption ( 230 V) |
8KVA/25 amps |
Approximate Weight | 3,600 lbs. (1,632.9 Kg) |
Dimensions | 5.41 x 2.66 x 3.91 ft. (1.64 x 0.81 x 1.19 M) |