Make: GANESH
Model: GT-1340
Our most popular lathe. Meehanite Castings, fine grain and high-density cast iron using the superior Meehanite process yields superior vibration dampening and improved surface finish and tool life, as well as greater wear resistance on the ground way surfaces.
Includes 1 year parts warranty!
Commonly in stock ready to load. Available to view under power on show room floor by appointment through Machinery Exchange. Ask for Jerad.
FINANCING AVAILABLE!
FEATURES
- Gap-Bed for added workpiece capacity
- 3-HP Spindle Motor
- Spindle Speeds from 70 – 2000 RPM
- 8-Spindle Speed Gear-Ranges for High-Torque
- Safety Foot Brake
- Includes Full-Length Back Splashguard
- MT#3 Tailstock Included for Shaft Work
- 6” 3-jaw scroll chuck
- 8” 4-jaw independent chuck
- Steady Rest Capacity: 10 – 90mm
- Follow Rest
- Full Length Splash Guard
- Foot brake
- 4-Way Tool Post w/wrench
- Chuck Guard w/ Micro Switch
- Machine Leveling Pads
- Halogen Work Light
- Optional accessories such as a DRO, quick change tool post, etc. available.
- Contact us to get you the best price quote.
| CAPACITY |
|
| Swing Over Bed |
13" |
| Center Height |
6-1/2" |
| Swing Over Cross Slide |
7-25/32" |
| Swing Over Gap |
18-3/4" |
| Length of Gap in Front of Face Plate, D1-4 |
4-1/2" |
| Distance Between Centers |
40" |
| SPINDLE |
|
| Spindle Motor |
3-HP |
| Spindle Speeds, 8 |
Low 70 to 190 High 460 to 1255 |
| Spindle Bore |
1-1/2" |
| Spindle Nose |
D1-4 |
| Spindle Taper |
MT-5 |
| CARRIAGE |
||
| Cross Slide Travel |
6-5/16" |
160mm |
| Cross Slide Width |
4-5/8" |
118mm |
| Cross Slide Lead Screw Pitch |
8 TPI |
|
| Cross Slide Resolution Per Division |
0.25"/rev |
|
| Carriage Lead Screw Diameter |
7/8" |
22mm |
| COMPOUND |
||
| Top Slide Travel |
2-11/16" |
68mm |
| Top Slide Width |
3" |
76mm |
| TAILSTOCK |
||
| Quill Diameter |
1-21/32" |
42mm |
| Quill Stroke |
4-1/2" |
114mm |
| Quill Taper |
MT-3 |
|
| THREAD CUTTING |
||
| Thread Cutting Range, 31 inch pitches |
4 - 56 tpi |
|
| Thread Cutting Range, 26 metric pitches |
0.4 - 7mm |
|
| FEEDS |
||
| Longitudinal, 32 feeds |
0.002" - 0.548"/rev. |
|
| Cross, 32 feeds |
0.0007 - 0.0187"/rev. |
|
| WEIGHT & DIMENSIONS |
||
| Machine Dimensions |
76-3/8" x 29-3/4" |
1940 x 755 mm |
| Machine Height |
48-3/4" |
1238mm |
| Machine Weight |
1345 lbs. |
610 kgs. |
| Power Requirements |
220 Volt, 3-Phase |
8.50 amps |
Warranty – 1 full year parts warranty on the machine provided by manufacturer.
Parts – Spare parts are available at our distributor's facility in Chatsworth to support your continued machine operation.
F.O.B. Point – Machines ship F.O.B. from Chatsworth, CA 91311