Make: GANESH
Model: GT-2680
Beautiful, new condition. Meehanite Castings, fine grain and high-density cast iron using the superior Meehanite process yields superior vibration dampening and improved surface finish and tool life, as well as greater wear resistance on the ground way surfaces.
Includes 1 year parts warranty!
Available to view under power on show room floor by appointment through Machinery Exchange. Ask for Jerad.
Optional accessories available.
FINANCING AVAILABLE!
FEATURES
- 33-1/4” Swing in 6.5” Wide Gap
- 15-HP Spindle Motor
- Spindle Speeds from 15 – 1200 RPM
- 12-Spindle Speed Gear-Ranges for High-Torque
- D1-11 Camlock Spindle
- 4-1/8” Spindle Bore
- Longitudinal Rapid Traverse Positioning
- Efficient 2-Speed Quill Advance
INCLUDES
- 12” 3-jaw Chuck
- 16” 4-jaw Chuck, 6.3" Bore
- Steady Rest
- Follow Rest
- Full Length Splash Guard
- Foot brake
- 4-Way Tool Post w/wrench
- Chuck Guard
- Machine Leveling Pads
- Halogen Work Light
SPECIFICATIONS
| CAPACITY |
|
|
Swing Over Bed |
26" |
|
Center Height |
13" |
|
Swing Over Cross Slide |
18-1/16" |
|
Swing Over Gap |
33-1/4" |
|
Length of Gap in Front of Face Plate, D1-6 |
6-1/2" |
|
Distance Between Centers |
80" |
| SPINDLE |
|
|
Spindle Motor |
15-HP |
|
Spindle Speeds, 12 |
Low 15 to 375 High 85 to 1200 |
|
Spindle Bore |
4-1/8" |
|
Spindle Nose |
D1-11 |
|
Spindle Taper |
MT-8 |
| CARRIAGE |
||
|
Cross Slide Travel |
14.96" |
380mm |
|
Cross Slide Width |
7-3/32" |
180mm |
|
Cross Slide Lead Screw Pitch |
4 TPI |
|
|
Cross Slide Resolution Per Division |
0.200"/rev |
|
|
Carriage Lead Screw Diameter |
1-1/2" |
38mm |
| COMPOUND |
||
|
Top Slide Travel |
10" |
255mm |
|
Top Slide Width |
4-11/32" |
110mm |
| TAILSTOCK |
||
|
Quill Diameter |
2-15/16" |
75mm |
|
Quill Stroke |
6-5/16" |
160mm |
|
Quill Taper |
MT-5 |
|
| THREAD CUTTING |
||
|
Thread Cutting Range, 60 inch pitches |
2 - 112 tpi |
|
|
Thread Cutting Range, 60 metric pitches |
0.2 - 14mm |
|
| FEEDS |
||
|
Longitudinal, 50 feeds |
0.0014” – 0.0387”/rev. |
|
|
Cross, 50 feeds |
0.0007” – 0.01935”/rev. |
|
| WEIGHT & DIMENSIONS |
||
|
Machine Dimensions |
140” x 51” |
|
|
Machine Height |
54" |
|
|
Machine Weight |
6,283 lbs. |
|
|
Power Requirements |
220 Volt, 3-Phase |
40 amps |
MACHINE OPTIONS
| Factory machine installation: “Peace-of-Mind Factory Installation” – includes expenses |
$1,995.00 |
| Wiring machine for 440-volt service. Net price |
$395.00 |
| Newall 2-Axis Digital Readout /Fagor DRO Installed |
$3,750.00 |
| Live Center MT-5 |
$1,185.00 |
| Dorian Wedge-Type Quick-Change tool post installed, size DA with 4” square base & 4-toolholders |
$1,995.00 |
Warranty– 1 full year parts warranty on the machine provided by manufacturer.
Parts– Spare parts are available at our distributor's facility in Chatsworth to support your continued machine operation.
F.O.B. Point – Machines ship F.O.B. from Chatsworth, CA 91311.